How to make Masteron

Home  \  Forums  \  Chemistry  \  How to make Masteron
How to make Masteron

5.0g "Powder"
7.5ml of Benzyl Benzoate
2.5ml of Benzyl Alcohol
36.25ml of your favorite Oil
20CC Syringe
12CC Syringe
1 23ga 0.5” needle
1 25ga 0.5” needle
.22um Sterile Whatman Filter
50ml Sterile Vial
50ml Vial
Muffin Tray
Electric Scale
Rubbing Alcohol/Paper Towels

1. Place 40ml oil in a muffin tray.
2. Place tray in oven at 225˚F & place pan on eye at med/low heat with some water in it.
3. Wipe down work area with Isopropyl Alcohol.
4. Place un-sterile vile on scales with funnel inserted and tare.
5. Transfer 5.0g powder to vile with the scoopula.
6. Wipe the caps with alcohol pad and add the 7.5ml of bb and 2.5ml of ba with the 12cc syringe.
7. Now add 31.25ml of the 36.25ml of oil into the vial to make total volume of oil/ba/bb/hormone to be 45 mL. Leave the 5ml of oil in the oven for later use.
8. Place vile with mixture in the pan on the oven eye to dissolve.
9. Take out sterile 50ml vial and wipe stopper with rubbing alcohol. Put the 23ga needle and the 25ga needle through stopper, and attach whatman filter to the 25ga.
10. Open up 20ml syringe and attach 18ga needle and draw up 20ml of unfiltered gear. Remove the pin and attach syringe to the filter. You will need to repeat this step until all the unfiltered soln has been transferred.
11. Once all the unfiltered soln has been transferred run the 5ml of oil you saved through the filterer to purge it. You can follow this with an air purge to get all the oil out.

This will yield 50ml at 100mg/ml. The process takes about 1hr.  

18 May 2004 03:20

Login   or  Signup to comment